Unusual ways to use the iron

Iron is a man’s friend – however, not everyone around you knows it. He does not bark, does not bite and is a universal means for “smoothing out” a lot of everyday issues. As customers in the store say – if he also brews coffee, then I definitely take it. Cooks, do not hesitate! And also ironing, washing, drying, tinkering and even re-gluing the wallpaper – we will tell you about all the sophisticated ways to use the iron at home.

Laziness is useful and harmful. Harmful laziness limits a person, prevents him from developing and achieving goals. A useful one, on the contrary, does everything so that the “owner” completes tasks as quickly as possible. Such laziness is also called the engine of progress. Thanks to useful laziness, a person is always looking for ways to speed up work, bypass difficult areas and automate something. For example, entrust cleaning to a robot vacuum cleaner , and washing to an automatic washing machine .

Washing machine Samsung WW80R42LHESDLP

Sometimes the ingenuity of “optimizers” goes too far and forces them to use the technique in non-standard tasks . Let’s say an iron – not only does it do a good job of straightening folds, but it also knows how to laminate documents, restore furniture, and even reheats food. Have you ever ironed a pizza? Then we go to you!

I’m ironing
The iron is not the only way, but the best way to smooth out the wrinkles in your clothes. It has a hot sole, a steam boost function and a Teflon coating that bounces 99% of dirt off. It is these traits of “character” that open up a whole list of “unofficial” possibilities for the owner of the iron.

300-420 Dumps
Identity-and-Access-Management-designer Dumps
Salesforce-Certified-Administrator Dumps
C_C4H320_02 PDF Dumps
C_ARP2P_2108 PDF Dumps
C1000-088 Exam Dumps
C1000-051 Exam Dumps
S1000-002 BrainDumps
WCNA BrainDumps
010-111 Practice Test
3V0-22.21 Practice Test
ASIS-APP Practice Test Questions
HPE6-A81 Practice Test Questions
500-920 Practice Questions
HPE6-A75 Practice Questions

It’s very simple – turn off the steam , heat the soleplate and dry it. For example, you can dry a well-wrung T-shirt with an iron – iron it on both sides, let it breathe on the hangers, then iron it again. Repeat until completely dry.

However, the iron dries not only clothes. Wet documents, banknotes, or plants are also good candidates for getting warm. A hot iron soleplate is the best way to quickly turn a flower or leaf into a herbarium.
Let’s make a reservation right away – lamination of documents, but not eyelashes. Using an iron, you can protect documents from moisture, dirt and wear. To do this, you need the document itself, lamination film and a sheet of paper . We put the document in the laminate, transfer it with A4 sheet and drive the iron along this structure. The iron should be set to medium power (silk mode).

On the inside, the film has a heat-sensitive adhesive, which is activated when heated . For a heightened effect and even gluing, it is necessary to drive the iron from the center to the edges. The procedure takes no more than 30 seconds. Before starting work, we advise you to practice on unnecessary documents.
We preserve
This method appeared at the end of the last century, when plastic bags were a luxury, thoroughly washed and dried on the balcony for the next “task”. The bags of that generation were thick enough to be used as reliable storage. However, with a certain skill, this can be done with modern “handles”.

To do this, it is necessary to close the bag so that folds do not appear at the seam. Then you need to place the soldering point between two paper sheets and run an iron over it. Before that, do not forget to fill the bag with the contents – this is how you can store vegetables, fruits and herbs.

To get rid of the dirt stuck in the fabric, you need to iron the problem area with a heated iron through a paper towel. Dirt will be absorbed into the paper and the surface of the fabric will be cleaned. After that, it is enough to wipe the scene with a dry towel.

In this way, surface contaminants such as candle wax can be removed . The method works similarly with sticky gum. You can also use an iron to clean carpet stains.
In stores: in 16 stores
You need to wet the surface and iron it through a cloth towel – for the best effect, you will have to repeat it several times. Here’s how it works:

We remove the wallpaper
Anyone who has done repairs with his own hands at least once in his life knows that removing old wallpaper is an activity for people with very strong nerves. The deadly eaten paper base will make the master literally crawl along the walls with a knife or spatula. Sometimes stripping even one square meter can take a long time.

As a rule, the method of wetting with a roller is used for “painless” removal of wallpaper from the walls. However, this process is more suitable for rough rooms without flooring and white ceilings – prepare for the fact that everything will be splashing and puddling around.

However, this mess can be avoided. To do this, you can use a special wallpaper steamer or an iron steam gun. Instead of a roller, we drive along the wall with a heated iron and “soar” abundantly. Pshik-pshik – he will take off the wallpaper as if by hand. More precisely, with an iron.

We restore wood
Solid wood products look expensive and rich, but if handled carelessly, they quickly lose their gloss. Furniture made of soft wood is especially susceptible to wear . For example, a solid canadian pine countertop has excellent appearance, but is very resistant to dents. One wrong movement is enough to seemingly irrevocably ruin the coating.

In fact, such damage can be repaired. To do this, you will need a preheated iron in the mode without steam and towels (T-shirt, rag). We moisten the damaged area with water, cover with a damp towel and iron until the dents disappear. Filling with moisture, damaged wood fibers tend to return to their original position, and rapid heating and drying speeds up the process.

In stores: tomorrow (from 20:00)
We create electronics
This method is known to a limited circle of people – amateurs of radio electronics. They use laser-ironing technology (LUT) to create printed circuit boards . True, one iron is not enough here. You will also need a laser printer , glossy photo paper, textolite and a solution of copper sulfate.

In its original form, the textolite is completely covered with copper foil. For etching the boards, a chemical solution is used, which eats the metal layer down to the base in a few minutes. To turn this coating into conductive paths, it is necessary to temporarily protect them from the action of vitriol. Previously, nail polish was used for this.

With the advent of laser printers, a new way of transferring tracks to textolite became available to radio amateurs. Now it is enough to design a printed circuit board on a computer, print in a suitable format and transfer this drawing to textolite as a transfer tattoo. And the iron will, of course, help with this. We apply the printed circuit with toner to the PCB and iron it. When heated, the polymer paint layer melts and adheres to the copper surface. After that, it is necessary to soak the structure in cool water and separate the paper from the PCB.

The remaining pattern is the very layer that protects the tracks during etching. Now you can poison.

Straighten your hair. You can dry and straighten unruly hair for your wife and even a baby doll. Just do not forget to adjust the power so as not to spoil the hair – the doll will endure, and the beautiful wife will walk away from the shock for a long time. The husband, at all, will have to visit the dentist.

Cooking food. The soleplate of an iron is an ideal surface for heating and warming up . For example, you can reheat pizza and even a hot sandwich on it. We recommend keeping an eye on the cheese – it can escape into the steam holes. To avoid problems and for reasons of hygiene, it is better to reheat food by wrapping it in foil.

We draw. If you melt the wax crayons on the soleplate of the iron, you can draw something.

We are doing sports. An iron can be used instead of a dumbbell. He has enough weight to warm up. We advise sports masters and professionals to take up heavy artillery – cast iron irons on coals. They are heavier and more reliable than modern counterparts.

We chop nuts. The iron is heavy enough and handy for breaking nutshells. Just do not forget that this fun activity will ruin the Teflon coating and render the equipment unusable.

We catch fish. More precisely, we use an iron instead of an anchor. Its weight will be just enough to stop a lightweight inflatable boat. Do not forget to unplug the iron before use. Otherwise, fishing will turn into a fire show with people and fish walking on the water.

Of course, this is only a limited list of what an iron can do in the skillful hands of a person endowed with a rich imagination. You also need to remember that some of these unusual methods are contrary to safety precautions and can lead to damage, as well as loss of warranty. For those who nevertheless decided on some kind of adventure in the company of a cast-iron friend – follow the guide on choosing the right iron.